USB to DMX controller for MadMapper and Modul8.
Unleash MadMapper's MadLight power thanks to this DMX controller.
This "NO DRIVER!" DMX controller is plug & play and ready to work with MadMapper and Modul8 (only). Control up to 512 DMX channels with this one universe controller that has a 3 pin connector.
And now with MadMapper 4, use multiple controllers with the DMX Router Module!
Although we would always recommend an Artnet Controller for serious installations, this new feature is a must.
Technical Specifications:
- USB 2.0 interface with bus powering
- 3 pin XLR female connector
- 1 universe DMX (512Channels)
- MadMapper and Modul8 compatible without driver
- compact size: 73x48x40mm (approx. 2.9x1.9x1.6 inches)
- weight: 120g
For 1 universe (512DMX channel), the classic USB-DMX controller by garageCube is enough.
Above 1 universe you’ll need an ArtNet controller which can support multiple universes, or you can use the MadMapper 4 DMX Router module to use multiple USB DMX controllers.
Although for serious installations with multiple universes, we strongly recommend using ArtNet.