Dell Networking X4012

Additional Features

IGMPv2 snooping
MLD snooping
GARP
GMP snooping
Jumbo frames
IPv6 support
IPv4 and IPv6 Static routing
USB support for update of firmware/configuration
Auto-update of firmware and configuration, from TFTP server/USB
Console port
Authentication via TACACS+ server
Port security
Dynamic ARP Inspection
DHCP Snooping
SHCP Relay
ACL
Voice VLAN
Unidirectional Link Detection (UDLD)
Multiple Spanning Tree (MSTP)
LLDP and LLDP-MED
sFlow V5
Port Profile (built-in scripts)

Chassis

X1008:
Dimensions (H x W x D):
1.67 in x 5.95 in x 5.95 in
(42.5 mm x 151.13 mm x 151.13 mm)
Rack mount: not available
Unit weight: 0.80 Kg
Fans: Fanless Design

X1018:
Dimensions (H x W x D):
1.62 in x 8.23 in x 9.84 in
(41.25 mm x 209.0 mm x 250.0 mm)
Rack mount: 1RU, half width
Unit weight: 1.76 Kg
Fans: Fanless Design

X1026:
Dimensions (H x W x D):
1.62 in x 8.23 in x 9.84 in
(41.25 mm x 209.0 mm x 250.0 mm)
Rack mount: 1RU, half width
Unit weight: 1.88 Kg
Fans: Fanless Design

X1052:
Dimensions (H x W x D):
1.71 in x 17.1 in x 10.63 in
(43.5 mm x 434.0 mm x 270.0 mm)
Rack mount: 1RU
Unit weight: 3.80 Kg
Fans: 2 (rear)

X4012:
Dimensions (H x W x D):
1.62 in x 8.23 in x 9.84 in
(41.25 mm x 209.0 mm x 250.0 mm)
Rack mount: 1RU, half width
Unit weight: 2.03 Kg
Fans: 2 (rear)

DHCP client support allows for simplified IP address assignment when used with a DHCP server.
Switch software can be easily uploaded to the switch through the web-management interface.
Configurations can be easily uploaded to and from the switch through the intuitive web-management interface.
Port statistics available through industry-standard RMON. Switch is factory-configured as an unmanaged switch, but can be easily configured as a web-managed switch with the push of a button.
Jumbo frame support for packets up to 9,000 bytes. Broadcast storm control to help eliminate network traffic storm.

Industry-standard link aggregation adhering to IEEE 802.3ad standards (static and dynamic, LACP)
Supports 12 link aggregation groups and up to 4 ports per group

Management

Local password and restricted IP addresses for secure access to the switch Port mirroring provides the capability of mirroring 8 source ports and VLAN mirroring to improve network traffic monitoring and troubleshooting.

Performance

MAC addresses: 16K
Packet buffer memory: 1 Mb

X1008:
Switch fabric capacity: Up to 16 Gbps
Forwarding rate: 11.9 Mpps

X1018:
Switch fabric capacity: Up to 36 Gbps
Forwarding rate: 26.8 Mpps

X1026:
Switch fabric capacity: Up to 52 Gbps
Forwarding rate: 38.7 Mpps

X1052:
Switch fabric capacity: Up to 176 Gbps
Forwarding rate: 131 Mpps

X4012:
Switch fabric capacity: Up to 240 Gbps
Forwarding rate: 178.6 Mpps

Port Attributes

Supports Virtual Cable Diagnostics by Marvell™ and fiber transceiver diagnostics to provide advanced troubleshooting capabilities for your cable infrastructure Integrated LEDs for improved visual monitoring and analysis.

X1008:
10/100/1000Base-T auto-sensing Gigabit Ethernet switching ports: 8
SFP/SFP + fiber ports: not available
Power over Ethernet (PoE) ports: not available
PoE powered: standard
Power reduction for short cables or inactive connections: standard
Autonegotiation for speed, duplex mode and flow control: standard
Auto-MDI/MDIX mode and flow control: standard

X1018:
10/100/1000Base-T auto-sensing Gigabit Ethernet switching ports: 16
SFP/SFP + fiber ports: 2 SFP
Power over Ethernet (PoE) ports: not available
PoE powered: not available
Power reduction for short cables or inactive connections: standard
Autonegotiation for speed, duplex mode and flow control: standard
Auto-MDI/MDIX mode and flow control: standard

X1026:
10/100/1000Base-T auto-sensing Gigabit Ethernet switching ports: 24
SFP/SFP + fiber ports: 2 SFP
Power over Ethernet (PoE) ports: not available
PoE powered: not available
Power reduction for short cables or inactive connections: standard
Autonegotiation for speed, duplex mode and flow control: standard
Auto-MDI/MDIX mode and flow control: standard

X1052:
10/100/1000Base-T auto-sensing Gigabit Ethernet switching ports: 48
SFP/SFP + fiber ports: 4 SFP/SFP +
Power over Ethernet (PoE) ports: not available
PoE powered: not available
Power reduction for short cables or inactive connections: standard
Autonegotiation for speed, duplex mode and flow control: standard
Auto-MDI/MDIX mode and flow control: standard

X4012:
10/100/1000Base-T auto-sensing Gigabit Ethernet switching ports: not available
SFP/SFP + fiber ports: 12 SFP/SFP+
Power over Ethernet (PoE) ports: not available
PoE powered: not available
Power reduction for short cables or inactive connections: not available
Autonegotiation for speed, duplex mode and flow control: not available
Auto-MDI/MDIX mode and flow control: not available

Power

X1008:
Power supply: 24W (external)
Power (max): 9.9W
Power BTU/hr: 33.7

X1018:
Power supply: 40W
Power (max): 14.7W
Power BTU/hr: 50.2

X1026:
Power supply: 40W
Power (max): 17.5W
Power BTU/hr: 59.8

X1052:
Power supply: 100W
Power (max): 60.2W
Power BTU/hr: 205.2

X4012:
Power supply: 100W
Power (max): 41.7W
Power BTU/hr: 142.2

Quality of Service

Honor 802.1p values and honor IP DSCP values
Supports strict priority and configurable weighted round robin (WRR) scheduling across queues

Priority queues per port:
X1008: 4
X1018: 4
X1026: 4
X1052: 8
X4012: 8

Regulatory

Product Safety, EMC and Environmental Datasheets
Dell Regulatory Compliance Home Page
Dell and the Environment

Standards Supported

IEEE 802.3ac — VLAN tagging
IEEE 802.3ad — Link aggregation with static LAG support
IEEE 802.1W — Rapid Spanning Tree (1)
IEEE 802.1D — Spanning Tree (1)
IEEE 802.1Q — Port-based VLANs
IEEE 802.1v — Protocol-based VLANs
IEEE 802.1p — Ethernet priority with user provisioning and mapping
IEEE 802.1X — Port authentication
IEEE 802.3x — Flow control
RFC 826 — ARP
RFC 854 — Telnet
RFC 855 — Telnet option
RFC 1155 — SMIv1
RFC 1157 — SNMP
RFC 1213 — MIB II — Updated by RFC’s 2011, 2012 and 2013
RFC 2579 — Textual conventions for SMI v2
RFC 2580 — Conformance statements for SMI v2
RFC 2819 — RMON
RFC 3164 — BSD Syslog Protocol
RFC 3416 — Management Information Base (MIB) for the Simple Network Management Protocol (SNMP) (December 2002)
RFC 768 — UDP
RFC 783 — TFTP
RFC 791 — IP
RFC 792 — ICMP
RFC 793 — TCP
RFC 951 — BOOTP
RFC 1533 — Including 1534, Interoperation between BOOTP and DHCP
DHCP server
RFC 2131 — Dynamic Host Configuration Protocol
RFC 2132 — DHCP options and BOOTP vendor extensions
RFC 950 — Internet Standard Subnetting Procedure
RFC 1123 — Requirements for internet hosts
RFC 1042 — A standards for transmission of IP datagrams over IEEE 802 networks
RFC 1071 — Computing the internet checksum

VLAN

Supports up to 4096 port-based VLANs. Honors all 4096 VLAN tags.